Climbing Gear > Protection

Protection

Adjustable Bandolier
To manage your rack and take weight off your harness, the anatomically-shaped Gear Sling slides over a shoulder and adjusts with a buckle. Its fleece lining adds a soft touch.

Price: R 185.85
CLIMBTECH RB 1/2 INCH
As one of the original innovations from ClimbTech, RB anchors are well known for their safety, speed and ease of use. But they are widely used because of their versatility. The .75 RB anchor does not require costly engineered inserts, and can be placed in horizontal, vertical, or overhead/ceiling surfaces. RB Anchors can be removed and reused at any desired location.

Price: R 706.23
Zodiac Gear Harness
For strangle-free rack management, the Zodiac’s two padded slings keep gear out of your way and distribute weight evenly across your back. It has a fleece lining for breathable comfort and a handy back pocket.

Price: R 281.43
Hanger
Standard Steel hanger 12mm

Price: R 30.30

Aid

Angles
Angles fit larger cracks, pockets and pods, and their design, coupled with the springiness of the steel used, gives these pitons inherently high holding power. When they’re not overdriven they are easy to remove and will last through many adventures.

Price: R 238.95
Cliffhanger
Hooking small to medium flakes, edges and rugosities, the Cliffhanger is an indispensable tool on necky aid lines. Its bipod base and chiseled point with flat tip are designed to prevent rotation and enhance stability. A short sling of 13 mm (1/2”) webbing is necessary for use.

Price: R 179.40
Fifi Hook
Easy to hook in a daisy, a Fifi is a big wall essential. Ours is made from 7075 aluminum and comes with a 15 cm sewn sling.

Price: R 206.50
Grabbling Hook
Slightly oversized for hooking larger edges and flakes than a Cliffhanger, the Grappling Hook’s relatively flat throw allows it to fit in tighter spots than most hooks and its wide bipod base is remarkably stable even on small edges.

Price: R 192.20
Knife Blades
Classic pitons for thinner cracks, they have precision-ground blades for a consistent taper and a hole in the thickest part of the head to reduce weight without sacrificing strength or durability. We recommend the offset eyes be used for clipping.

Price: R 187.30
Lost Arrows
Tough enough to withstand repeated abuse, these hot forged big wall pitons are patterned after the original designs of John Salathé and as light as possible for their given size. When all else fails... stack ‘em.

Price: R 274.35
Peckers
For hairline cracks, subtle seams and indistinct fractures, the Pecker’s knife-thin, double-tapered blade fits where nothing else will.

Price: R 336.07
RURP's
Used in bottoming, incipient cracks, this aid tool has opened up otherwise unclimbable passages. To ensure its continued usefulness if fixed, the RURP has a swaged wire loop.

Price: R 224.69
Talons
Three hooks let you match hook size to edge easily from 5 mm (3/16”) to 13 mm (1/2”) and the extra broad base increases stability. The Talon should be slung with a 51 cm (20”) length of 14 mm (9/16”) tubular webbing

Price: R 278.46
Yosemite Hammer
Our classic wall hammer was introduced in ‘66 when big wall climbing was in its infancy. The hammer’s weight is concentrated in its investment-cast 17-4 stainless steel head.

Price: R 1821.10

Cams

C4 Camalots ranges fron 0.3 - 5
Increasing your chances of grabbing a cam that fits, the Camalot’s double-axle design allows retraction of larger cam lobes, giving our cams a much larger expansion range than single-axle units.

Price: R 1344.58
Rack Pack
The Rack Pack is a convenient six-pack of Neutrinos anodized to match Camalot colors—makes racking super easy.

Price: R 516.84
Camalot C3' ranges from (000 - 2)
In a tight spot? Absolutely. With up to 30% less head width than any other micro cam, C3 Camalots fit in more places more securely.

Price: R 910.22
Camalot Trigger Kits
Official Black diamond trigger replacement kits for dual stem and new single stem Camalots.

Price: R 126.00

Passive

Hex Set 4-10 - with wire oval
Anodized Wired Hexes are also sold in a convenient set, which includes #4 to #10 with an OvalWire biner.

Price: R 1137.58
Micro Stopper (c/s) Set 1-6 with wire oval
Micro Stoppers are available in a convenient set that includes the full size run of #1 to #6, neatly attached to an OvalWire biner.

Price: R 1108.02
Micro Stopper (copper/steel) 1-6
Versatile thin crack pro, trapezoidal Micro Stoppers feature a subtle curve on their longest face for maintaining utility in near-parallel cracks while still catching on crystals and irregularities.

Price: R 1108.02
Nut Tool
Unstick fused nuts, retrieve buried cams and leave the route booty-free with our lightweight Nut Tool. Its slim design fits in thin cracks and a hook on the end is ideal for getting after stuck cams.

Price: R 165.50
Stopper Anodised SET 4-13 w wire oval
Our anodized Stopper Set includes sizes #4 to #13 and comes with an OvalWire biner for easy racking.

Price: R 1319.71

Rigging

Rotor
The Rotor is mounted on an enclosed bearing that is silky smooth and each end will hold up to three biners.

Price: R 610.65
Redblock
Device that extends lifetime of the rope when top-roping.

Price: R 504.45
Tandem Pulley
Great for traversing

Price: R 867.30
Small Roll Pulley
Very versatile pulley

Price: R 232.93
Twin Roll Pulley


Price: R 961.64
Extra Roll Pulley
Slightly bigger and stronger than the small roll pulley

Price: R 578.61

To view the brand websites, please click on the logos below:

Gidgitz Steripen Nikwax GSI Princeton Saltic Black Diamond Pacific Outdoor Beal Jetboil E3 Singing Rock